Testing the coolant system on JCB machines before heavy use

[Alan]

Before you put your JCB to the test you definitely don’t want to deal with any overheating issues. So, how do you go about testing the coolant system? Pressure tests, leak detectors, temperature checks? Let’s hear what methods have been most effective for you.

 

[Agriboom21]

There have been days when the gauge barely budged, but the hoses were quietly sweating away. I’ve found that doing pressure tests and running the system under a moderate load usually reveals any weak points. And if you add a thermal gun into the mix, you can spot potential problems before they mess up your job or ruin your day.

 

[golddigg3r]

I used to brush off a little drip thinking it was no big deal but then I watched the temp gauge climb into the danger zone. Now, I always start with a pressure test and keep a close eye on the temps while it’s running. If anything seems off, I whip out the leak detector catching issues early really saves a lot of hassle

 

[JohnCBeere]

In the beginning, I thought just eyeballing it would do the trick. I learned the hard way when a tiny leak escalated into a boiled radiator. Now I make sure to do pressure tests, check the hoses, and feel for any hot spots. It might not be the most exciting part of the job, but a few minutes of prep keeps the JCB running smoothly and my sanity intact.