Pre-start checklist for overnight idle JCBs

[Kirathor]

As I approached my JCB, which had been resting all night, the engine was cool and quiet.
What’s your quick pre-start checklist to make sure the hydraulics, electrics, and all the other systems are ready to roll before you jump into the day?

 

[JCBeezy]

First, do a quick check on the fluids, hydraulics, engine oil, and coolant. Don’t overlook this step. Next, power up the electrics and take a look at the battery and fuses. Finally, run a few test cycles on the hydraulics to ensure they're running smoothly. It's straightforward.

 

[Earthmoverz]

Check the oil, coolant, and all fluids first. Next, check the battery.
Before starting anything, test the hydraulics just a few cycles to catch any issues.
If something’s not right, you’ll catch it right away

 

[Agriboom21]

It's a good practice to run through the basics: fluid checks, battery connections, and all that. Then, cycle the hydraulics slowly and listen for any odd sounds. Think of it like warming up before a workout it helps avoid that frustrating failure when you’re in the middle of a task!

 

[Earthgoliath]

Pop the hood, check those fluid levels, and make sure no hoses are cracked or frozen.
Don’t forget to look at the fuel filter and battery it’ll give you some peace of mind.
And definitely test the hydraulics; there’s nothing worse than discovering they’re sluggish halfway through a job.